Main swimming pool equipment
Filter is a device filled with quartz sand grain size prescribed through which circulates pool water and keeps dirt accumulated in the pool. Company Bazeni Plus d.o.o. is primarily installing sand filters of German company Dinotec and Austrian company Praher , but also German company Behncke and British company Certikin.
Adequate size of the filter is calculated by volume of the pool (m³). This table lists the appropriate filter sizes for particular dimensions of the pool:
|For pools up to m³||40||50||80||90||160||230||325||385||550||700|
2. CIRCULATING PUMPS
The circulating pump provides a circular fluctuation of water from the pool, through the pipe and filter for filtration and chemical treatment, and return to the pool. Bazeni Plus d.o.o. are installing exclusively circulating pumps by German company Speck Pumpen.
According to the size of the pool (m³) and the filter is selected circulating pump of adequate flow (m³/h) taking into account the basic rule that all water from the pool must circulate through the filtration system within 4-5h. Speck Company Pumpen products pumps flow rate of 4m³/h – 110m³/h.
3. SKIMMERS AND WATER ADDITIONS (for pools with skimmers)
Skimmers are systems for draining water from the pool through pipes in the engine room. Installation altitude of skimmer determines the level of water in the pool, which is usually 10-15cm below the boundary stone, or in the level of walkway around the pool. Water addition is installed in skimmers and automatically supplements water in the pool if the water level falls. The main supplier of skimmers and supplements of the company Bazeni Plus Ltd. is renowned German company MTS Produkte.
4. CONTROL OF THE LEVEL AND ADDITIONS (for overflow swimming pools)
Instead of the Skimmer system, pool can function through the topping of one, several or all parties. The difference compared to the skimmer system is a necessity of making overflow channels and compensating tanks in which water overflows, and installing devices to control water levels and water additions in the be compensatory tank. An additional need is to set spillway grid to the overflow channel if it is not a unilateral overflow. Other equipment is the same for both methods of building a swimming pool. Our supplier of equipment to control the level is German company Dinotec.
5. FLOOR DRAIN, NOZZLE, VACUUM NOZZLE
Floor drain serves to drain the pool, but also for the extra water intake into the engine (filter) as it is connected to the pump. Nozzles are used to return water to the pool (with pools with skimmer system are built into the wall, and with overflow swimming pool are built in the floor). The vacuum nozzle is not essential for the functioning of the pool but makes it easy to manually vacuum the pool, and only increases minimally cost of basic equipment. German MTS Produkte is a major manufacturer of embedded elements for swimming pools.
6. MANIFOLDS AND FITTINGS
PVC pipes and fittings are used to connect all the pool elements and devices in the functional unit (elbows, valves, muff, reducers, adapters, etc.) of high quality that should ensure long term durability considering to the block up and working under pressure. Pool pipes are connected with Tangit glue. The Austrian company Praher is a leading manufacturer of the pool pipes and fittings and sole supplier of Bazeni Plus Ltd.
Power (electricity) for the functioning of swimming pools must be brought in the the engine room where the cabinet is placed (junction box) with fuses and switches which ensure the functioning of electrical devices (pumps, pools lights, automatic dosing and control, etc.).
8. CLEANING SET
For manual cleaning and pool maintenance are required meshes, brushes, telescopic tube, vacuum cleaner and hose which is connected to the vacuum nozzle, and chemicals for water treatment. Our suppliers of cleaning sets are the German company MTS Produkte and Austrian company Praher.